Service Maintenance Cleans

Standard Service Maintenance Clean
Split System Filter: BEFORE

Split System Filter: BEFORE

Indoor unit
  • Hand clean air filters, return & supply grills
  • Hand Clean all diffusers
  • Flush & check drainage
  • Spray cleaner in the drain tray to avoid bacteria & algae growth
  • Check the unit on heating & cooling mode

    Split System Filter: AFTER Standard Service

    Split System Filter: AFTER Standard Service

 Outdoor
  • Hand clean coils & unit’s panels to remove material deposits
  • Spray Cleaner on coils to protect against environmental factors
  • Check refrigerant charge

 

Hydro Pressure Clean
All the above components are checked & cleaned using a Hydro Pressure Cleaner, providing a very thorough clean & access to indoor components not accessible by hand. The indoor unit is pressure cleaned directly on the wall without dismantling or disconnecting. A specially designed bag is installed to drain off the water and cleaning agent. It is used to fully clean the fan barrel & coil, which also flushes out the condensation drain. A fan barrel clean is not included during a Standard Service as it is not accessible by hand & requires the indoor unit to be dismantled for access.
Why choose a Hydro Pressure Clean?
  1. The fan barrel is accessible & is cleaned during the service
  2. A more efficient & thorough clean
  3. Unpleasant smell coming from the unit
  4. Mould found in the indoor unit – mould on the fan barrel
Fan Barrel- Excessive mould and dust build up causing the unit to strain

Fan Barrel- Excessive mould and dust build up causing the unit to strain

Same Fan Barrel after a Hydro Pressure Clean

Same Fan Barrel after a Hydro Pressure Clean

 

 

 

 

 

 

 

 

Comments & Responses

Comments are closed.